Construction

Gallons Per Minute (GPM) Calculator

Calculate flow rate in gallons per minute from volume and time.


Gallons Per Minute (GPM) Calculator

Find a flow rate in gallons per minute (GPM) — the standard way pump, faucet, and irrigation output is measured.

How it works

GPM is the volume delivered divided by the time it took: GPM = Gallons ÷ Minutes. 500 gallons delivered over 25 minutes is a flow rate of 20 GPM.

What this does not include

This calculates an average flow rate from a measured volume and time — it doesn’t model how pipe diameter, pump pressure, or elevation change would affect flow rate in a system you haven’t measured directly.

How to use this calculator

  1. Enter the volume delivered, in gallons.
  2. Enter the time it took, in minutes.

A worked example

500 gallons collected over 25 minutes: flow rate = 500 ÷ 25 = 20 GPM.

1,200 gallons over 60 minutes: flow rate is also 20 GPM.

What the variables mean

Variable Meaning
Gallons Total volume collected or delivered
Minutes Time taken

Edge cases worth knowing

The same GPM can come from very different total volumes and times, as both examples above show — flow rate is a ratio, not tied to any specific volume.

Zero minutes makes the flow rate undefined — no finite time means no meaningful rate to calculate, so the calculator declines to show a result.

Frequently asked questions

Why does GPM matter for choosing a pump?

A pump’s GPM rating tells you how quickly it can move water, which determines whether it can keep up with a given irrigation zone, fill rate, or drainage need.

How is GPM different from PSI?

GPM measures volume over time (how much water moves); PSI measures pressure (how hard the water pushes) — a system can have high pressure and low flow, or the reverse.

How do I measure gallons and time to use this calculator?

Time how long it takes to fill a container of known volume (a 5-gallon bucket is a common choice), then enter that volume and time directly.

Sources

  1. Standard flow-rate formula: gallons per minute = volume / time; a basic hydraulics convention.
Be the first to rate this

Written and checked by the Calculator Folks editorial team. How we write and review

Related calculators